[PATCH v3 4/4] spi: mediatek: replace *_time name
From: Leilk Liu <hidden>
Date: 2015-08-24 03:46:32
Also in:
linux-devicetree, linux-mediatek, linux-spi, lkml
Subsystem:
spi subsystem, the rest · Maintainers:
Mark Brown, Linus Torvalds
This patch replaces *_time name in mtk_spi_prepare_transfer(). Signed-off-by: Leilk Liu <redacted> --- drivers/spi/spi-mt65xx.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index e14f583..eaadc7e 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c@@ -238,8 +238,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable) static void mtk_spi_prepare_transfer(struct spi_master *master, struct spi_transfer *xfer) { - u32 spi_clk_hz, div, high_time, low_time, holdtime, - setuptime, cs_idletime, reg_val = 0; + u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0; struct mtk_spi *mdata = spi_master_get_devdata(master); spi_clk_hz = clk_get_rate(mdata->spi_clk);
@@ -248,21 +247,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, else div = 1; - high_time = (div + 1) / 2; - low_time = (div + 1) / 2; - holdtime = (div + 1) / 2 * 2; - setuptime = (div + 1) / 2 * 2; - cs_idletime = (div + 1) / 2 * 2; + sck_time = (div + 1) / 2; + cs_time = sck_time * 2; - reg_val |= (((high_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((low_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); - reg_val |= (((holdtime - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); - reg_val |= (((setuptime - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); + reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); + reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); writel(reg_val, mdata->base + SPI_CFG0_REG); reg_val = readl(mdata->base + SPI_CFG1_REG); reg_val &= ~SPI_CFG1_CS_IDLE_MASK; - reg_val |= (((cs_idletime - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET); writel(reg_val, mdata->base + SPI_CFG1_REG); }
--
1.8.1.1.dirty