Heiko,

On Fri, Aug 14, 2015 at 3:13 PM, Heiko St?bner [off-list ref] wrote:

Hi Shawn,

Am Freitag, 14. August 2015, 16:34:35 schrieb Shawn Lin:

quoted

DesignWare MMC Controller can supports two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to support these platforms. I've tested it on RK312x
platform with edmac mode and RK3288 platform with idmac mode.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

judging by your "from", I guess you're running this on some older Rockchip soc
without the idma? Because I tried testing this on a Radxa Rock, but only got
failures, from the start (failed to read card status register). In PIO mode
everything works again.


I guess I overlooked just some tiny detail, but to me the dma channel ids seem
correct after all. Maybe you have any hints what I'm doing wrong?

If I were a guessing man (which I'm not), I'd guess that perhaps
you're running into troubles with our friend the PL330.

There appear to be strange issues with the PL330 on Rockchip SoCs.  I
was only peripherally involved with them, but I know at least about
some of the patches in our tree, like:

https://chromium-review.googlesource.com/237607
FROMLIST: DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit

https://chromium-review.googlesource.com/237393
CHROMIUM: dmaengine: pl330: support quirks for some broken

https://chromium-review.googlesource.com/237396
CHROMIUM: dmaengine: pl330: add quirk for broken no flushp

https://chromium-review.googlesource.com/237394
CHROMIUM: ARM: dts: rockchip: Add broken-no-flushp into rk3288.dtsi

https://chromium-review.googlesource.com/242063
CHROMIUM: ASoC: rockchip_i2s: modify DMA max burst to 1