[PATCH v4 1/2] usb: make xhci platform driver use 64 bit or 32 bit DMA
From: Duc Dang <hidden>
Date: 2015-08-08 01:04:27
Also in:
lkml
Subsystem:
the rest, usb subsystem, usb xhci driver · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Mathias Nyman
The xhci platform driver needs to work on systems that
either only support 64-bit DMA or only support 32-bit DMA.
Attempt to set a coherent dma mask for 64-bit DMA, and
attempt again with 32-bit DMA if that fails.
[dhdang: regenerate the patch over 4.2-rc5]
Signed-off-by: Mark Langsdorf <redacted>
Tested-by: Mark Salter <redacted>
Signed-off-by: Duc Dang <redacted>
---
Changes from v3:
Re-generate the patch over 4.2-rc5
No code change.
Changes from v2:
None
Changes from v1:
Consolidated to use dma_set_mask_and_coherent
Got rid of the check against sizeof(dma_addr_t)
drivers/usb/host/xhci-plat.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 890ad9d..5d03f8b 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c@@ -93,14 +93,14 @@ static int xhci_plat_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - /* Initialize dma_mask and coherent_dma_mask to 32-bits */ - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - else - dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + /* Try setting the coherent_dma_mask to 64 bits, then try 32 bits */ + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (ret) { + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd)
--
1.9.1