[PATCH v6 0/8] ARM64: juno: add SCPI mailbox protocol, clock and CPUFreq support
From: Liviu.Dudau@arm.com (Liviu Dudau)
Date: 2015-08-03 10:19:07
Also in:
linux-clk, linux-devicetree, linux-pm, lkml
On Fri, Jul 31, 2015 at 06:43:03PM +0100, Sudeep Holla wrote:
Hi ARM-SoC guys,
It has been on the list for a while and have got all the necessary ACKs.
Can you please pull this series for v4.3 ?
Regards,
Sudeep
This patch series adds support for:
1. SCPI(System Control and Power Interface) mailbox protocol driver.
It uses ARM MHU mailbox controller driver on Juno but can work with
any mailbox controllers using standard mailbox APIs
2. Add support for clocks provided by SCP firmware through the SCPI
interface
3. Using the existing arm_big_little cpufreq driver and the newly
added SCPI clock driver, it also adds support for CPU DVFS on
ARM64 JUNO development platforms.Hi Sudeep, Is there a branch where I can pull this series from? Best regards, Liviu
The SCPI protocol document is available @[1],[2] Changes v5->v6: - Minor review comments on clock bindings and clock driver - Added all the ACKs necessary Changes v4->v5: - Updated the SCPI clock bindings to correct the clock specifier usage and other minor updates as per review feedback - Updated clock driver to use SCPI specifier clock specifier decode function - Minor reshuffling in Juno DTS files, no functionality change Changes v3->v4: - Updated the SCPI binding based on MarkR's feedback - Updated SCPI clock driver to incorporate Stephen Boyd's review comments + used clk_set_rate_range to limit the clock range - Since no major changes are expected in SCPI DT, updated the Juno DTS to support SCPI and dependent device nodes. Changes v2->v3: - Minor fix in SCPI driver and added Tixy's reviewed-by tag - Updated scpi clock driver to incorporate all the comments from Stephen - Added Viresh's ack Changes v1->v2: - Updated the token handling in scpi driver as per Tixy's suggestion along with other review comments - Removed multiple drivers in scpi clock as Lorenzo suggested - Added free_opp_table in scpi-cpufreq as Viresh suggested - Separated the DT binding document - Moved SCPI protocol driver to drivers/firmware [1] http://community.arm.com/servlet/JiveServlet/download/8401-45-18326/DUI0922B_scp_message_interface.pdf [2] https://wiki.linaro.org/ARM/Juno?action=AttachFile&do=get&target=DUI0922B_scp_message_interface.pdf v1: https://lkml.org/lkml/2015/4/27/232 v2: https://lkml.org/lkml/2015/5/14/470 v3: https://lkml.org/lkml/2015/5/27/220 v4: https://lkml.org/lkml/2015/6/8/178 v5: https://lkml.org/lkml/2015/7/23/270 Cc: devicetree at vger.kernel.org Cc: linux-clk at vger.kernel.org Cc: linux-pm at vger.kernel.org Sudeep Holla (8): Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol firmware: add support for ARM System Control and Power Interface(SCPI) protocol clk: add support for clocks provided by SCP(System Control Processor) clk: scpi: add support for cpufreq virtual device cpufreq: arm_big_little: add SCPI interface driver arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno arm64: dts: add CPU topology on Juno arm64: dts: add clock support for all the cpus Documentation/devicetree/bindings/arm/arm,scpi.txt | 150 +++++ MAINTAINERS | 10 + arch/arm64/boot/dts/arm/juno-base.dtsi | 54 ++ arch/arm64/boot/dts/arm/juno-r1.dts | 32 + arch/arm64/boot/dts/arm/juno.dts | 32 + drivers/clk/Kconfig | 10 + drivers/clk/Makefile | 1 + drivers/clk/clk-scpi.c | 325 ++++++++++ drivers/cpufreq/Kconfig.arm | 9 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/scpi-cpufreq.c | 124 ++++ drivers/firmware/Kconfig | 19 + drivers/firmware/Makefile | 1 + drivers/firmware/arm_scpi.c | 711 +++++++++++++++++++++ include/linux/scpi_protocol.h | 61 ++ 15 files changed, 1540 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/arm,scpi.txt create mode 100644 drivers/clk/clk-scpi.c create mode 100644 drivers/cpufreq/scpi-cpufreq.c create mode 100644 drivers/firmware/arm_scpi.c create mode 100644 include/linux/scpi_protocol.h -- 1.9.1
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
?\_(?)_/?