Hello,

On 31 July 2015 at 14:53, Hans de Goede [off-list ref] wrote:

Enable the otg/drc usb controller on the A10s OLinuxIno Micro.

Note the A10s OlinuxIno Micro always has some voltage on its otg power
pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is
enough to make vbus-det always report 1, so we do not use vbus-det on
this board.

What board revision do you have?

Also does this not go down when you connect a device which draws power?

It is useless for self-powered device detection, though :-s

Still the Olinuxino is not battery powered normally so powering the
bus at all times is probably ok.

Thanks

Michal