[PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset

Vaibhav Hiremath [off-list ref] writes:

Normally i2c controller works as master, so slave addr is not needed, or it
will impact some slave device (eg. ST NFC chip) i2c accesses, because it has
the same i2c address with controller.

Signed-off-by: Jett.Zhou <redacted>
Signed-off-by: Vaibhav Hiremath <redacted>
Cc: Wolfram Sang <redacted>

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

Cheers.

-- 
Robert