[Patch v3 5/5] ARM: tegra: enable NAND flash on Colibri T20
From: computersforpeace@gmail.com (Brian Norris)
Date: 2015-07-21 21:07:02
Also in:
linux-devicetree, linux-tegra
On Sun, May 10, 2015 at 08:30:02PM +0200, Lucas Stach wrote:
quoted hunk
This enables the on-module ONFI conformant NAND flash. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- arch/arm/boot/dts/tegra20-colibri-512.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 8e0066a..540b3fd 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi@@ -455,6 +455,13 @@ }; }; + nand at 70008000 { + status = "okay"; + nand-bus-width = <8>; + nand-on-flash-bbt; + nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
^^ Is write-protect support necessary, or just optional? b/c you didn't implement support in the NAND driver yet.
+ };
+
usb at c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)Brian