[PATCH 06/23] ARM: at91/dt: at91sam9260: use slow clock where necessary
From: Alexandre Belloni <hidden>
Date: 2015-07-31 09:46:57
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The watchdog, the reset controller, the real-time timer, the shutdown controller, the timer counters need the slow clock, add it where necessary. Signed-off-by: Alexandre Belloni <redacted> --- arch/arm/boot/dts/at91sam9260.dtsi | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 4bc347549102..be9c027ddd97 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi@@ -359,11 +359,13 @@ rstc at fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; shdwc at fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; pit: timer at fffffd30 {
@@ -379,8 +381,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer at fffdc000 {
@@ -389,8 +391,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; pinctrl at fffff400 {
@@ -973,6 +975,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt;
--
2.1.4