[PATCH 01/11] mmc: host: omap_hsmmc: Support vmmc_aux to switch to 1.8v
From: Kishon Vijay Abraham I <hidden>
Date: 2015-07-30 07:47:08
Also in:
linux-mmc, linux-omap, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, omap hs mmc support, the rest · Maintainers:
Ulf Hansson, Linus Torvalds
Add support for vmmc_aux to switch to 1.8v. Also use "iov" instead of "vdd" to indicate io voltage. This is in preparation for adding support for io signal voltage switch. Signed-off-by: Kishon Vijay Abraham I <redacted> --- drivers/mmc/host/omap_hsmmc.c | 47 +++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6d52873..09e949f 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c@@ -243,10 +243,11 @@ static int omap_hsmmc_get_cover_state(struct device *dev) return mmc_gpio_get_cd(host->mmc); } -static int omap_hsmmc_enable_supply(struct mmc_host *mmc) +static int omap_hsmmc_enable_supply(struct mmc_host *mmc, int iov) { int ret; struct mmc_ios *ios = &mmc->ios; + int uvoltage; if (mmc->supply.vmmc) { ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
@@ -255,7 +256,24 @@ static int omap_hsmmc_enable_supply(struct mmc_host *mmc) } /* Enable interface voltage rail, if needed */ - if (mmc->supply.vqmmc && !regulator_is_enabled(mmc->supply.vqmmc)) { + if (mmc->supply.vqmmc) { + if (regulator_is_enabled(mmc->supply.vqmmc)) { + ret = regulator_disable(mmc->supply.vqmmc); + if (ret) { + dev_err(mmc_dev(mmc), + "vmmc_aux reg disable failed\n"); + goto err_vqmmc; + } + } + + uvoltage = (iov == VDD_165_195) ? VDD_1V8 : VDD_3V0; + ret = regulator_set_voltage(mmc->supply.vqmmc, uvoltage, + uvoltage); + if (ret) { + dev_err(mmc_dev(mmc), "vmmc_aux set voltage failed\n"); + goto err_vqmmc; + } + ret = regulator_enable(mmc->supply.vqmmc); if (ret) { dev_err(mmc_dev(mmc), "vmmc_aux reg enable failed\n");
@@ -304,22 +322,19 @@ err_set_ocr: } static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on, - int vdd) + int iov) { int ret; + int uvoltage; if (!host->pbias) return 0; if (power_on) { - if (vdd <= VDD_165_195) - ret = regulator_set_voltage(host->pbias, VDD_1V8, - VDD_1V8); - else - ret = regulator_set_voltage(host->pbias, VDD_3V0, - VDD_3V0); - if (ret < 0) { - dev_err(host->dev, "pbias set voltage fail\n"); + uvoltage = (iov <= VDD_165_195) ? VDD_1V8 : VDD_3V0; + ret = regulator_set_voltage(host->pbias, uvoltage, uvoltage); + if (ret) { + dev_err(host->dev, "pbias set voltage failed\n"); return ret; }
@@ -343,7 +358,7 @@ static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on, return 0; } -static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd) +static int omap_hsmmc_set_power(struct device *dev, int power_on, int iov) { struct omap_hsmmc_host *host = platform_get_drvdata(to_platform_device(dev));
@@ -358,7 +373,7 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd) return 0; if (mmc_pdata(host)->before_set_reg) - mmc_pdata(host)->before_set_reg(dev, power_on, vdd); + mmc_pdata(host)->before_set_reg(dev, power_on, iov); ret = omap_hsmmc_set_pbias(host, false, 0); if (ret)
@@ -378,11 +393,11 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd) * chips/cards need an interface voltage rail too. */ if (power_on) { - ret = omap_hsmmc_enable_supply(mmc); + ret = omap_hsmmc_enable_supply(mmc, iov); if (ret) return ret; - ret = omap_hsmmc_set_pbias(host, true, vdd); + ret = omap_hsmmc_set_pbias(host, true, iov); if (ret) goto err_set_voltage; } else {
@@ -392,7 +407,7 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd) } if (mmc_pdata(host)->after_set_reg) - mmc_pdata(host)->after_set_reg(dev, power_on, vdd); + mmc_pdata(host)->after_set_reg(dev, power_on, iov); return 0;
--
1.7.9.5