[PATCH v2 2/5] Documentation: Detail permitted DT properties for the imx6ul_tsc
STALE4061d
From: Haibo Chen <hidden>
Date: 2015-07-28 09:56:14
Also in:
linux-devicetree, linux-input, lkml
Subsystem:
input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
Here we apply required documentation for the imx6ul touch screen controller driver which describe available properties and how to use them. Signed-off-by: Haibo Chen <redacted> --- .../bindings/input/touchscreen/imx6ul_tsc.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
new file mode 100644
index 0000000..ac41c32
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt@@ -0,0 +1,36 @@ +* Freescale i.MX6UL Touch Controller + +Required properties: +- compatible: must be "fsl,imx6ul-tsc". +- reg: this touch controller address and the ADC2 address. +- interrupts: the interrupt of this touch controller and ADC2. +- clocks: the root clock of touch controller and ADC2. +- clock-names; must be "tsc" and "adc". +- xnur-gpio: the X- gpio this controller connect to. + This xnur-gpio returns to high once the finger leave the touch screen (The + last touch event the touch controller capture). + +Optional properties: +- measure-delay-time: the value of measure delay time. + Before X-axis or Y-axis measurement, the screen need some time before + even potential distribution ready. + This value depends on the touch screen. +- pre-charge-time: the touch screen need some time to precharge. + This value depends on the touch screen. + +Example: + tsc: tsc at 02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + measure-delay-time = <0xfff>; + pre-charge-time = <0xffff>; + status = "okay"; + };
--
1.9.1