On Wed, 15 Jul 2015, Paul Walmsley wrote:

On Wed, 3 Jun 2015, Vignesh R wrote:

quoted

Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support
smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence,
program clock domain to SW_WKUP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 57d5df0c1fbd..7581e036bda6 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c

@@ -331,7 +331,7 @@ static struct clockdomain l4per2_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_L4PER2_STATDEP_SHIFT,
 	.wkdep_srcs	  = l4per2_wkup_sleep_deps,
 	.sleepdep_srcs	  = l4per2_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu0_7xx_clkdm = {

Thanks, queued for v4.2-rc fixes.  Note that I cannot test this, since I 
don't have a DRA7xx board.

You know, upon further thought, this doesn't make sense.  If the bug
is with the PWMSS IP block specifically, why not just set 
HWMOD_SWSUP_SIDLE on all the IP blocks where the hardware folks didn't 
implement hardware smart-idle?  At least that way, if those legacy IP 
blocks aren't in use, the clockdomain can still enter hardware-supervised 
idle?

This patch basically disables hardware-supervised/smart idle for all of 
the IP blocks in that clockdomain?


- Paul