[PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
From: Hans de Goede <hidden>
Date: 2015-06-20 15:40:07
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2015-06-25 · Re: [PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes · Maxime Ripard <hidden>
- 2015-06-23 · Re: [PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes · Maxime Ripard <hidden>
- 2015-06-22 · Re: [PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes · Julian Calaby <hidden>
- 2015-06-22 · Re: [PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes · Hans de Goede <hidden>
- 2015-06-22 · Re: [PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes · Julian Calaby <hidden>
u-boot will have turned on the power to the usb host ports, so mark them as regulator-boot-on, this stops the power on the ports from temporarily getting turned off during boot, causing issues with e.g. usb powered harddisks. Signed-off-by: Hans de Goede <redacted> --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 51cc838..f1953b0 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi@@ -108,6 +108,7 @@ regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled";
@@ -120,6 +121,7 @@ regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled";
--
2.4.3