[PATCH] clk: samsung: fix cpu clock's flags checking
From: Bartlomiej Zolnierkiewicz <hidden>
Date: 2015-06-29 17:31:48
Also in:
linux-clk, linux-pm, linux-samsung-soc, lkml
Subsystem:
common clk framework, samsung soc clock drivers, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Sylwester Nawrocki, Chanwoo Choi, Linus Torvalds
CLK_CPU_HAS_DIV1 and CLK_CPU_NEEDS_DEBUG_ALT_DIV masks were incorrectly used as a bit numbers. Fix it. Tested on Exynos4210 based Origen board and on Exynos5250 based Arndale board. Cc: Tomasz Figa <redacted> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Javier Martinez Canillas <redacted> Cc: Thomas Abraham <redacted> Reported-by: Dan Carpenter <redacted> Signed-off-by: Bartlomiej Zolnierkiewicz <redacted> --- drivers/clk/samsung/clk-cpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 3a1fe07..dd02356 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c@@ -161,7 +161,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, * the values for DIV_COPY and DIV_HPM dividers need not be set. */ div0 = cfg_data->div0; - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { div1 = cfg_data->div1; if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK) div1 = readl(base + E4210_DIV_CPU1) &
@@ -182,7 +182,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1; WARN_ON(alt_div >= MAX_DIV); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { /* * In Exynos4210, ATB clock parent is also mout_core. So * ATB clock also needs to be mantained at safe speed.
@@ -203,7 +203,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, writel(div0, base + E4210_DIV_CPU0); wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL); - if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_HAS_DIV1) { writel(div1, base + E4210_DIV_CPU1); wait_until_divider_stable(base + E4210_DIV_STAT_CPU1, DIV_MASK_ALL);
@@ -222,7 +222,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, unsigned long mux_reg; /* find out the divider values to use for clock data */ - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { while ((cfg_data->prate * 1000) != ndata->new_rate) { if (cfg_data->prate == 0) return -EINVAL;
@@ -237,7 +237,7 @@ static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata, writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU); wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1); - if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) { + if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) { div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK); div_mask |= E4210_DIV0_ATB_MASK; }
--
1.9.1