[PATCH] ARM: dts: vf610: Extend I2C support to all available buses.
From: stefan@agner.ch (Stefan Agner)
Date: 2015-06-16 08:53:39
Also in:
linux-devicetree, lkml
On 2015-06-15 02:19, Cory Tusar wrote:
This commit extends the existing Vybrid I2C support to cover buses i2c1, i2c2, and i2c3. Based in (very) large part on an initial patch by Stefan Agner that was just lacking a couple of DMA assignments. Signed-off-by: Cory Tusar <redacted>
Thx Cory for picking that up. So with that patch we use the second Mux of DMA0 the first time. Another option would have been to use the first Mux of DMA1, however I think its better to leave DMA1 for dedicated purposes or the secondary Cortex-M4 core... If a board needs different configuration, one would also have the option to overwrite the properties. Acked-by: Stefan Agner <stefan@agner.ch> -- Stefan
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/vfxxx.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 4aa3351..25f2615 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi@@ -347,6 +347,20 @@ status = "disabled"; }; + i2c1: i2c at 40067000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40067000 0x1000>; + interrupts = <72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C1>; + clock-names = "ipg"; + dmas = <&edma0 0 52>, + <&edma0 0 53>; + dma-names = "rx","tx"; + status = "disabled"; + }; + clks: ccm at 4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>;@@ -520,6 +534,33 @@ status = "disabled"; }; + i2c2: i2c at 400e6000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x400e6000 0x1000>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C2>; + clock-names = "ipg"; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + i2c3: i2c at 400e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x400e7000 0x1000>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C3>; + clock-names = "ipg"; + dmas = <&edma0 1 38>, + <&edma0 1 39>; + dma-names = "rx","tx"; + status = "disabled"; + }; }; }; };