---
 .../devicetree/bindings/clock/hi6220-clock.txt     | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
new file mode 100644
index 0000000..53ddb19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt

@@ -0,0 +1,34 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+       indicate the clock controller functionality.
+
+       - "hisilicon,hi6220-aoctrl"
+       - "hisilicon,hi6220-sysctrl"
+       - "hisilicon,hi6220-mediactrl"
+       - "hisilicon,hi6220-pmctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+For example:
+       sys_ctrl: sys_ctrl {
+               compatible = "hisilicon,hi6220-sysctrl", "syscon";
+               reg = <0x0 0xf7030000 0x0 0x2000>;
+               #clock-cells = <1>;
+       };
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.

-- 
1.9.1