[PATCH 1/2] clk: at91: add a new compatible string for Flexcom in the DT documentation
From: Cyrille Pitchen <hidden>
Date: 2015-06-02 16:49:57
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patches documents the new bindings for the Flexcom clock, which will be introduced by Atmel sama5d2x chips. Signed-off-by: Cyrille Pitchen <redacted> --- .../devicetree/bindings/clock/at91-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 7a4d492..df4f40b 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt@@ -77,6 +77,9 @@ Required properties: "atmel,sama5d4-clk-h32mx": at91 h32mx clock + "atmel,sama5d2-flexcom": + at91 flexcom clock + Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -461,3 +464,20 @@ For example: compatible = "atmel,sama5d4-clk-h32mx"; clocks = <&mck>; }; + +Required properties for flexcom clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the Flexcom peripheral clock from PMC. +- reg : shall be the range for Flexcom dedicated I/O registers (without USART, + TWI or SPI registers). +- atmel,flexcom-mode : shall be a string value among { "spi", "usart", "i2c", + "twi" }. "i2c" and "twi" are synonymous. + +For example: + flx0: flexcom at f8034000 { + compatible = "atmel,sama5d2-flexcom"; + #clock-cells = <0>; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + atmel,flexcom-mode = "spi"; + };
--
1.8.2.2