[PATCH 05/12] i2c: pxa: Add bus reset functionality

From
Robert Jarzmik <robert.jarzmik@free.fr>
Date
2015-05-29 20:31:37
Also in
linux-i2c
Vaibhav Hiremath [off-list ref] writes:
From: Rob Herring <robh@kernel.org>

Since there is some problematic i2c slave devices on some
platforms such as dkb (sometimes), it will drop down sda
and make i2c bus hang, at that time, it need to config
scl/sda into gpio to simulate "stop" sequence to recover
i2c bus, so add this interface.

Signed-off-by: Leilei Shang <redacted>
Signed-off-by: Rob Herring <robh@kernel.org>
[vaibhav.hiremath at linaro.org: Updated Changelog]
Signed-off-by: Vaibhav Hiremath <redacted>

Signed-off-by: Vaibhav Hiremath <redacted>
I'm not enthusiastic about this patch.
Linus, would you please place a comment on this patch ?

My personal feeling :
 - all the udelays are just ugly
 - the pinctrl binding into i2c-pxa doesn't look good to me
   Linus will probably comment on that

 - all of this patch looks like a workaround for a single platform "poor"
   support. If this is dkb specific (what is dkb BTW ?), can't it be hooked
   into this driver, but placed in dkb platform code ?

Cheers.

--
Robert
quoted hunk
---
 drivers/i2c/busses/i2c-pxa.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 8ca5552..eb09071 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -37,6 +37,8 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <asm/irq.h>
 
@@ -177,6 +179,9 @@ struct pxa_i2c {
 	bool			highmode_enter;
 	unsigned int		ilcr;
 	unsigned int		iwcr;
+	struct pinctrl		*pinctrl;
+	struct pinctrl_state	*pin_i2c;
+	struct pinctrl_state	*pin_gpio;
 };
 
 #define _IBMR(i2c)	((i2c)->reg_ibmr)
@@ -269,6 +274,62 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
 
 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
 
+static void i2c_bus_reset(struct pxa_i2c *i2c)
+{
+	int ret, ccnt, pins_scl, pins_sda;
+	struct device *dev = i2c->adap.dev.parent;
+	struct device_node *np = dev->of_node;
+
+	if (!i2c->pinctrl) {
+		dev_warn(dev, "could not do i2c bus reset\n");
+		return;
+	}
+
+	ret = pinctrl_select_state(i2c->pinctrl, i2c->pin_gpio);
+	if (ret) {
+		dev_err(dev, "could not set gpio pins\n");
+		return;
+	}
+
+	pins_scl = of_get_named_gpio(np, "i2c-gpio", 0);
+	if (!gpio_is_valid(pins_scl)) {
+		dev_err(dev, "i2c scl gpio not set\n");
+		goto err_out;
+	}
+	pins_sda = of_get_named_gpio(np, "i2c-gpio", 1);
+	if (!gpio_is_valid(pins_sda)) {
+		dev_err(dev, "i2c sda gpio not set\n");
+		goto err_out;
+	}
+
+	gpio_request(pins_scl, NULL);
+	gpio_request(pins_sda, NULL);
+
+	gpio_direction_input(pins_sda);
+	for (ccnt = 20; ccnt; ccnt--) {
+		gpio_direction_output(pins_scl, ccnt & 0x01);
+		udelay(5);
+	}
+	gpio_direction_output(pins_scl, 0);
+	udelay(5);
+	gpio_direction_output(pins_sda, 0);
+	udelay(5);
+	/* stop signal */
+	gpio_direction_output(pins_scl, 1);
+	udelay(5);
+	gpio_direction_output(pins_sda, 1);
+	udelay(5);
+
+	gpio_free(pins_scl);
+	gpio_free(pins_sda);
+
+err_out:
+	ret = pinctrl_select_state(i2c->pinctrl, i2c->pin_i2c);
+	if (ret)
+		dev_err(dev, "could not set default(i2c) pins\n");
+	return;
+}
+
 static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 {
 	unsigned int i;
@@ -281,6 +342,11 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 	for (i = 0; i < i2c->irqlogidx; i++)
 		printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
 	printk("\n");
+	if (strcmp(why, "exhausted retries") != 0) {
+		i2c_bus_reset(i2c);
+		/* reset i2c contorler when it's fail */
+		i2c_pxa_reset(i2c);
+	}
 }
 
 #else /* ifdef DEBUG */
@@ -1301,6 +1367,30 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, i2c);
 
+	i2c->pinctrl = devm_pinctrl_get(&dev->dev);
+	if (IS_ERR(i2c->pinctrl)) {
+		i2c->pinctrl = NULL;
+		dev_warn(&dev->dev, "could not get pinctrl\n");
+	} else {
+		i2c->pin_i2c = pinctrl_lookup_state(i2c->pinctrl, "default");
+		if (IS_ERR(i2c->pin_i2c)) {
+			dev_err(&dev->dev, "could not get default(i2c) pinstate\n");
+			ret = IS_ERR(i2c->pin_i2c);
+		}
+
+		i2c->pin_gpio = pinctrl_lookup_state(i2c->pinctrl, "gpio");
+		if (IS_ERR(i2c->pin_gpio)) {
+			dev_err(&dev->dev, "could not get gpio pinstate\n");
+			ret = IS_ERR(i2c->pin_gpio);
+		}
+
+		if (ret) {
+			i2c->pin_i2c = NULL;
+			i2c->pin_gpio = NULL;
+			i2c->pinctrl = NULL;
+			ret = 0;
+		}
+	}
 #ifdef CONFIG_I2C_PXA_SLAVE
 	printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
 	       dev_name(&i2c->adap.dev), i2c->slave_addr);
-- 
Robert
Thread (1 message) 1 message, 1 author, last reply 2015-05-29
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help