Memory size unaligned to section boundary
From: mark.rutland@arm.com (Mark Rutland)
Date: 2015-05-06 10:43:44
Hi Russell, On Wed, May 06, 2015 at 11:11:05AM +0100, Russell King - ARM Linux wrote:
quoted hunk ↗ jump to hunk
On Thu, Apr 23, 2015 at 03:19:45PM +0200, Stefan Agner wrote:quoted
Hi, It seems to me that I hit an issue in low memory mapping (map_lowmem). I'm using a custom memory size, which leads to an freeze on Linux 4.0 and also with Linus master on two tested ARMv7-A SoC's (Freescale Vybrid and NVIDIA Tegra 3): With mem=259744K [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.0.0-00189-ga4d2a4c3-dirty (ags at trochilidae) (gcc version 4.8.3 20140401 (prerelease) (Linaro GCC 4.8-2014.04) ) #506 Thu Apr 23 14:13:21 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Toradex Colibri VF61 on Colibri Evaluation Board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: Reserved 16 MiB at 0x8e400000 [ 0.000000] Memory policy: Data cache writeback <freeze> I dug a bit more into that, and it unveiled that when creating the mapping for the non-kernel_x part (if (kernel_x_end < end) in map_lowmem), the unaligned section at the end leads to the freeze. In alloc_init_pmd, if the memory end is section unaligned, alloc_init_pte gets called which allocates a PTE outside of the initialized region (in early_alloc_aligned). The system freezes at the call of memset in early_alloc_aligned function. With some debug print, this can be better illustrated: [ 0.000000] pgd 800063f0, addr 8fc00000, end 8fda8000, next 8fda8000 [ 0.000000] pud 800063f0, addr 8fc00000, end 8fda8000, next 8fda8000 [ 0.000000] pmd 800063f0, addr 8fc00000, next 8fda8000 => actual end of memory ^^^^^^^^ [ 0.000000] alloc_init_pte [ 0.000000] set_pte_ext, pte 00000000, addr 8fc00000, end 8fda8000 [ 0.000000] early_pte_alloc [ 0.000000] early_alloc_aligned, 00001000, ptr 8fcff000, align 00001000 => PTE allocated outside of initialized area ^^^^^^^^Right, and the question is why does that happen - and the answer is this: /* * Round the memblock limit down to a section size. This * helps to ensure that we will allocate memory from the * last full section, which should be mapped. */ if (memblock_limit) memblock_limit = round_down(memblock_limit, SECTION_SIZE); That should round down by 2x SECTION_SIZE to ensure that we don't start allocating the L2 page table in a section which isn't mapped. Please try this patch: arch/arm/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4e6ef896c619..387becac5c86 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c@@ -1142,7 +1142,7 @@ void __init sanity_check_meminfo(void) * last full section, which should be mapped. */ if (memblock_limit) - memblock_limit = round_down(memblock_limit, SECTION_SIZE); + memblock_limit = round_down(memblock_limit, 2 * SECTION_SIZE); if (!memblock_limit) memblock_limit = arm_lowmem_limit;
For LPAE, where SECTION_SIZE == PMD_SIZE, this will set the memblock limit a section lower than necessary. In another subthread thread [1] I suggested roudning down to PMD_SIZE instead, which should do the right thing regardless of LPAE. Thanks, Mark. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/340925.html