8250 UART driver for NXP LPC18xx family

Started by Joachim Eastwood on May 15, 2015

DORMANTno replies SUPERSEDED

Status: Superseded by v2 (posted 2015-05-30). [go to v2]

Revision v1 (2 revisions archived).

Revisions (2)
  1. v1 current
  2. v2 [diff against previous]

open the first message on its own page

Message details and related content
This patch set adds a serial port driver for the 8250-
based UART found on LPC18xx/43xx devices. The UART is
16550A compatible with additional features like RS485
support, synchronous mode, IrDA, and DMA.

For now only basic UART and RS485 operation is supported.

The plan is add additional features like DMA support once
the PL080 DMA controller gets device tree bindings.

Joachim Eastwood (2):
  serial: 8250: add LPC18xx/43xx UART driver
  doc: dt: add documentation for nxp,lpc1850-uart

 .../bindings/serial/nxp,lpc1850-uart.txt           |  21 +++
 drivers/tty/serial/8250/8250_lpc18xx.c             | 204 +++++++++++++++++++++
 drivers/tty/serial/8250/Kconfig                    |   8 +
 drivers/tty/serial/8250/Makefile                   |   1 +
 4 files changed, 234 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
 create mode 100644 drivers/tty/serial/8250/8250_lpc18xx.c

-- 
1.8.0
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help