[PATCH v5 2/3] Documentation: bindings: document the Berlin ADC driver
From: jic23@kernel.org (Jonathan Cameron)
Date: 2015-05-23 09:48:58
Also in:
linux-iio, lkml
On 18/05/15 10:19, Antoine Tenart wrote:
Following the addition of a Berlin ADC driver, this patch adds the corresponding bindings documentation. Signed-off-by: Antoine Tenart <redacted> Acked-by: Jonathan Cameron <jic23@kernel.org>
Applied and pushed out as the togreg branch of iio.git. Thanks,
quoted hunk ↗ jump to hunk
--- .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txtdiff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt new file mode 100644 index 000000000000..908334c6b07f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt@@ -0,0 +1,19 @@ +* Berlin Analog to Digital Converter (ADC) + +The Berlin ADC has 8 channels, with one connected to a temperature sensor. +It is part of the system controller register set. The ADC node should be a +sub-node of the system controller node. + +Required properties: +- compatible: must be "marvell,berlin2-adc" +- interrupts: the interrupts for the ADC and the temperature sensor +- interrupt-names: should be "adc" and "tsen" + +Example: + +adc: adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; +};