[PATCH v9 3/5] dt-bindings: Document the STM32 USART bindings
From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
Date: 2015-05-22 21:05:06
Also in:
linux-api, linux-devicetree, linux-serial, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
This adds documentation of device tree bindings for the STM32 USART Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> --- .../devicetree/bindings/serial/st,stm32-usart.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..8480a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt@@ -0,0 +1,32 @@ +* STMicroelectronics STM32 USART + +Required properties: +- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on +whether the device supports synchronous mode. +- reg: The address and length of the peripheral registers space +- interrupts: The interrupt line of the USART instance +- clocks: The input clock of the USART instance + +Optional properties: +- pinctrl: The reference on the pins configuration +- auto-flow-control: bool flag to enable hardware flow control. + +Examples: +usart4: serial at 40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&clk_pclk1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart4>; +}; + +usart2: serial at 40004400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&clk_pclk1>; + auto-flow-control; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; +};
--
1.9.1