Hi Rafael,
On 5/15/15, 18:59, "Rafael J. Wysocki" [off-list ref] wrote:
On Friday, May 15, 2015 04:23:11 PM Suravee Suthikulpanit wrote:
quoted
This patch refactors of_pci_dma_configure() into a more generic
pci_dma_configure(), which can be reused by non-OF code.
Then, it adds support for setting up PCI device DMA coherency from
ACPI _CCA object that should normally be specified in the DSDT node
of its PCI host bridge..
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Will Deacon <redacted>
CC: Rafael J. Wysocki <redacted>
CC: Murali Karicheri <redacted>
---
drivers/of/of_pci.c | 20 --------------------
drivers/pci/probe.c | 35 +++++++++++++++++++++++++++++++++--
include/linux/of_pci.h | 3 ---
3 files changed, 33 insertions(+), 25 deletions(-)
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 5751dc5..b66ee4e 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -117,26 +117,6 @@ int of_get_pci_domain_nr(struct device_node *node)
}
EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
-/**
- * of_pci_dma_configure - Setup DMA configuration
- * @dev: ptr to pci_dev struct of the PCI device
- *
- * Function to update PCI devices's DMA configuration using the same
- * info from the OF node of host bridge's parent (if any).
- */
-void of_pci_dma_configure(struct pci_dev *pci_dev)
-{
- struct device *dev = &pci_dev->dev;
- struct device *bridge = pci_get_host_bridge_device(pci_dev);
-
- if (!bridge->parent)
- return;
-
- of_dma_configure(dev, bridge->parent->of_node);
- pci_put_host_bridge_device(bridge);
-}
-EXPORT_SYMBOL_GPL(of_pci_dma_configure);
-
#if defined(CONFIG_OF_ADDRESS)
/**
* of_pci_get_host_bridge_resources - Parse PCI host bridge resourcesfrom DT
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6675a7a..3c6f2e5 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,12 +6,14 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/of_pci.h>
+#include <linux/of_device.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/pci-aspm.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
#include <asm-generic/pci-bridge.h>
#include "pci.h"
@@ -1508,6 +1510,35 @@ static void pci_init_capabilities(struct pci_dev
*dev)
pci_enable_acs(dev);
}
+/**
+ * pci_dma_configure - Setup DMA configuration
+ * @pci_dev: ptr to pci_dev struct of the PCI device
+ *
+ * Function to update PCI devices's DMA configuration using the same
+ * info from the OF node or ACPI node of host bridge's parent (if any).
+ */
+static void pci_dma_configure(struct pci_dev *pci_dev)
+{
+ struct device *dev = &pci_dev->dev;
+ struct device *bridge = pci_get_host_bridge_device(pci_dev);
+ struct device *host = bridge->parent;
+ struct acpi_device *adev;
+
+ if (!host)
+ return;
+
+ if (acpi_disabled) {
+ of_dma_configure(dev, host->of_node);
I'd rather do
if (IS_ENABLED(CONFIG_OF) && host->of_node) {
of_dma_configure(dev, host->of_node);
} else {
struct acpi_device *adev = ACPI_COMPANION(host);
if (adev && acpi_dma_is_supported(adev)) {
Ok, I?ll update this.
quoted
+ } else if (has_acpi_companion(host)) {
+ adev = acpi_node(host->fwnode);
+ if (acpi_dma_is_supported(adev))
+ arch_setup_dma_ops(dev, 0, 0, NULL,
+ acpi_dma_is_coherent(adev));
+ }
+
+ pci_put_host_bridge_device(bridge);
+}
+
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
int ret;@@ -1521,7 +1552,7 @@ void pci_device_add(struct pci_dev *dev, struct
pci_bus *bus)
dev->dev.dma_mask = &dev->dma_mask;
dev->dev.dma_parms = &dev->dma_parms;
dev->dev.coherent_dma_mask = 0xffffffffull;
- of_pci_dma_configure(dev);
+ pci_dma_configure(dev);
Also I'm not quite sure if that's actually OK.
We should be handling the DMA setup on x86 in the ACPI case already
without it.
Or is this a NOP on x86?
You are correct. x86 doesn?t implement the arch_setup_dma_ops().
Therefore, this is a NOP on x86.
Thanks,
Suravee