[PATCH v2 08/10] reset: sunxi: Add compatible for Allwinner H3 bus resets
From: Jens Kuske <hidden>
Date: 2015-05-15 16:40:40
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds
Adding a new compatible allows us to define SoC specific behaviour if necessary, for example forcing a particular device out of reset even if no driver is actually using it. Signed-off-by: Jens Kuske <redacted> --- Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt | 1 + drivers/reset/reset-sunxi.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
index c8f7757..e11f023 100644
--- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt@@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following: "allwinner,sun6i-a31-ahb1-reset" "allwinner,sun6i-a31-clock-reset" + "allwinner,sun8i-h3-bus-reset" - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below
diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index 3d95c87..6f12b5c 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c@@ -124,6 +124,7 @@ err_alloc: */ static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = { { .compatible = "allwinner,sun6i-a31-ahb1-reset", }, + { .compatible = "allwinner,sun8i-h3-bus-reset", }, { /* sentinel */ }, };
--
2.4.0