[PATCH v3 0/6] Add dwc3 usb3 DT node and various phy cleanup

Hi Peter,

On 04/30/2015 03:30 PM, Peter Griffin wrote:

Hi Maxime,

This series primarily adds the dwc3 DT node which activates the usb3 controller on
the stih407-b2120, stih410-b2120 and stih418-b2199 platforms.

As part of getting this working I noticed an error with the picophyreset which
stops the controller working which I've also fixed.

regards,

Peter.

Changes in v3:
- Add miphys8lp options properties for stih418 (Pete)
- Add support for stih418-b2199 (Max)
- Only enable usb3 controller in the board file (Max)
- Fix superflous '\n' (Lee)
- Rebase series on v4.1-rc1 (Pete)

NB: Since v2 some patches were taken into the phy and ahci trees which I've now
removed from the series.

Changes in v2:
- Update commit to explicitly say no ABI breakage (Rob)
- Rebase series on v4.0-rc6 (Pete)
- Collect up Acks (Pete)

Peter Griffin (6):
   ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers
     usb2 phy
   ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.
   usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
   ARM: DT: STi: stihxxx-b2120: Enable USB3 port on stih407-b2120 and
     stih410-b2120
   ARM: DT: STi: STiH418: Add miphy28lp optional oscillator clock
     properties
   ARM: DT: STi: STiH418: Enable USB3 port on stih418-b2199.

  Documentation/devicetree/bindings/usb/dwc3-st.txt |  7 +++---
  arch/arm/boot/dts/stih407-family.dtsi             | 30 ++++++++++++++++++++++-
  arch/arm/boot/dts/stih418-b2199.dts               | 15 ++++++++++++
  arch/arm/boot/dts/stihxxx-b2120.dtsi              |  5 ++++
  4 files changed, 52 insertions(+), 5 deletions(-)

All DT patches of the series applied to STi DT branch for v4.2.

Thanks!
Maxime