On Wednesday 06 May 2015 15:06:29 Gregory CLEMENT wrote:

On 04/05/2015 22:08, Sebastian Hesselbarth wrote:

quoted

This is v2 of the patch set to improve current mainline support for
the Compulab CM-A510 System-on-Module (SoM) and its default Compulab
SBC-A510 base board.

Compared to v1 [1] there have been the overall changes:
- Drop i2c-mux-pinctrl rework as Wolfram Sang raised concerns with
  respect to OF_DYNAMIC. Instead we add i2c-mux-pinctrl node by
  default and wait until corresponding driver respects disabled
  sub-bus nodes. This will add 3 additional i2c busses to all
  Dove based boards, but no functional change with respect to
  i2c-0.
- Split patches dealing with arch/arm/boot/dts/Makefile to route
  them though arm-soc directly.

Other patches of v1 have already been taken by MVEBU SoC maintainers
as fixes.

Patches are based on v4.1-rc1 and are intended for v4.2. All patches
contain appropriate Acked-by's from related maintainers. Patches 3
and 5 should go thought arm-soc directly, the rest can go though
mvebu tree.

Usually even the change of the arch/arm/boot/dts/Makefile go to
arm-soc through mvebu. For patch 5 it makes sens because if the series
is spited then the Makefile could be merged before the new file
to build.

So unless, Arnd or Olof really want to pick the patches 3 and 5 I will
apply the patches 2 to 5 on mvebu/dt.

Arnd, Olof, do you agree?

Yes, please pick up all the patches and send them to us with your
normal pull requests.

	Arnd