Thread (46 messages) 46 messages, 10 authors, 2015-06-30
STALE4009d
Revisions (10)
  1. rfc [diff vs current]
  2. v1 [diff vs current]
  3. v2 [diff vs current]
  4. v3 [diff vs current]
  5. v4 [diff vs current]
  6. v4 [diff vs current]
  7. v5 [diff vs current]
  8. v6 [diff vs current]
  9. v7 [diff vs current]
  10. v8 current

[PATCH v8 4/9] mfd: Add binding document for NVIDIA Tegra XUSB

From: Andrew Bresticker <hidden>
Date: 2015-05-04 17:37:36
Also in: linux-devicetree, linux-tegra, lkml
Subsystem: multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add a binding document for the XUSB host complex on NVIDIA Tegra124
and later SoCs.  The XUSB host complex includes a mailbox for
communication with the XUSB micro-controller and an xHCI host-controller.

Signed-off-by: Andrew Bresticker <redacted>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <redacted>
Cc: Kumar Gala <redacted>
Cc: Samuel Ortiz <redacted>
Cc: Lee Jones <redacted>
---
Changes from v7:
 - Move non-shared resources into child nodes.
New for v7.
---
 .../bindings/mfd/nvidia,tegra124-xusb.txt          | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
new file mode 100644
index 0000000..bc50110
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
@@ -0,0 +1,37 @@
+NVIDIA Tegra XUSB host copmlex
+==============================
+
+The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
+controller and a mailbox for communication with the XUSB micro-controller.
+
+Required properties:
+--------------------
+ - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
+   Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
+   where <chip> is tegra132.
+ - reg: Must contain the base and length of the XUSB FPCI registers.
+ - ranges: Bus address mapping for the XUSB block.  Can be empty since the
+   mapping is 1:1.
+ - #address-cells: Must be 2.
+ - #size-cells: Must be 2.
+
+Example:
+--------
+	usb at 0,70098000 {
+		compatible = "nvidia,tegra124-xusb";
+		reg = <0x0 0x70098000 0x0 0x1000>;
+		ranges;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		usb-host at 0,70090000 {
+			compatible = "nvidia,tegra124-xhci";
+			...
+		};
+
+		mailbox {
+			compatible = "nvidia,tegra124-xusb-mbox";
+			...
+		};
+	};
-- 
2.2.0.rc0.207.ga3a616c
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help