[PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
From: Arun Ramamurthy <hidden>
Date: 2015-04-22 23:03:40
Also in:
linux-fbdev, linux-ide, linux-media, linux-samsung-soc, lkml
Subsystem:
framebuffer layer, generic phy framework, libata subsystem (serial and parallel ata drivers), media input infrastructure (v4l/dvb), the rest, usb subsystem · Maintainers:
Helge Deller, Vinod Koul, Damien Le Moal, Niklas Cassel, Mauro Carvalho Chehab, Linus Torvalds, Greg Kroah-Hartman
Most of the phy providers use "select" to enable GENERIC_PHY. Since select is only recommended when the config is not visible, GENERIC_PHY is changed an invisible option. To maintain consistency, all phy providers are changed to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic dependency, so it is left as "select". Signed-off-by: Arun Ramamurthy <redacted> --- drivers/ata/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 2 +- drivers/phy/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- drivers/video/fbdev/exynos/Kconfig | 2 +- 5 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..6d2e881 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig@@ -301,7 +301,6 @@ config SATA_MV tristate "Marvell SATA support" depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST - select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips,
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index b7b2e47..b6f3eaa 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig@@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" depends on REGULATOR - select GENERIC_PHY + depends on GENERIC_PHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de2..edecdb1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig@@ -5,7 +5,7 @@ menu "PHY Subsystem" config GENERIC_PHY - bool "PHY Core" + bool help Generic PHY support.
@@ -72,7 +72,7 @@ config PHY_MIPHY365X config PHY_RCAR_GEN2 tristate "Renesas R-Car generation 2 USB PHY driver" depends on ARCH_SHMOBILE - depends on GENERIC_PHY + select GENERIC_PHY help Support for USB PHY found on Renesas R-Car generation 2 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e4..e2197e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig@@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" depends on ARCH_STI && OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_EHCI_HCD_PLATFORM help Enable support for the on-chip EHCI controller found on
@@ -409,7 +409,7 @@ config USB_OHCI_HCD_SPEAR config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" depends on ARCH_STI && OF - select GENERIC_PHY + depends on GENERIC_PHY select USB_OHCI_HCD_PLATFORM help Enable support for the on-chip OHCI controller found on
diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
index 1f16b46..6c53894 100644
--- a/drivers/video/fbdev/exynos/Kconfig
+++ b/drivers/video/fbdev/exynos/Kconfig@@ -16,7 +16,7 @@ if EXYNOS_VIDEO config EXYNOS_MIPI_DSI bool "EXYNOS MIPI DSI driver support." - select GENERIC_PHY + depends on GENERIC_PHY help This enables support for MIPI-DSI device.
--
2.3.4