[PATCHv5 26/35] ARM: dts: omap3: add minimal l4 bus layout with control module support
From: tony@atomide.com (Tony Lindgren)
Date: 2015-03-30 22:56:34
Also in:
linux-omap
Hi, * Tero Kristo [off-list ref] [150320 11:46]:
quoted hunk ↗ jump to hunk
--- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi@@ -87,6 +87,60 @@ ranges; ti,hwmods = "l3_main"; + l4_core: l4 at 48000000 { + compatible = "ti,omap3-l4-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x1000000>; + + scm: scm at 2000 { + compatible = "ti,omap3-scm", "simple-bus"; + reg = <0x2000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + omap3_pmx_core: pinmux at 30 { + compatible = "ti,omap3-padconf", + "pinctrl-single"; + reg = <0x30 0x230>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + };
Just noticed we may be now missing few pins as diffing the dmesg before and after this series produces this on omap3: -pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 +pinctrl-single 48002030.pinmux: 280 pins at pa fa002030 size 560 Care to check that? Regards, Tony