From: Geert Uytterhoeven <geert+renesas@glider.be>

The da9210 regulator is connected to IRQ2. Reflect this in its device
node, so the driver can use it when it gains interrupt support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <redacted>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index a3c2780..213a643 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -520,6 +520,8 @@
 	vdd_dvfs: regulator at 68 {
 		compatible = "dlg,da9210";
 		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;

-- 
2.1.4