[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup · Dave.Martin@arm.com (Dave Martin) · 2015-03-04
[PATCH REPOST 1/2] serial/amba-pl011: Activate TX IRQ passively · Dave.Martin@arm.com (Dave Martin) · 2015-03-04
[PATCH REPOST 1/2] serial/amba-pl011: Activate TX IRQ passively · Russell King - ARM Linux <hidden> · 2015-03-12
[PATCH REPOST 1/2] serial/amba-pl011: Activate TX IRQ passively · Dave.Martin@arm.com (Dave Martin) · 2015-03-12
[PATCH REPOST 1/2] serial/amba-pl011: Activate TX IRQ passively · Russell King - ARM Linux <hidden> · 2015-03-12
[PATCH REPOST 1/2] serial/amba-pl011: Activate TX IRQ passively · Dave.Martin@arm.com (Dave Martin) · 2015-03-12
[PATCH REPOST 2/2] serial/amba-pl011: Leave the TX IRQ alone when the UART is not open · Dave.Martin@arm.com (Dave Martin) · 2015-03-04
[PATCH REPOST 2/2] serial/amba-pl011: Leave the TX IRQ alone when the UART is not open · Russell King - ARM Linux <hidden> · 2015-03-12
[PATCH REPOST 2/2] serial/amba-pl011: Leave the TX IRQ alone when the UART is not open · Dave.Martin@arm.com (Dave Martin) · 2015-03-12
[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup · andre.przywara@arm.com (Andre Przywara) · 2015-03-04
[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup · Dave.Martin@arm.com (Dave Martin) · 2015-03-05
[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup · andre.przywara@arm.com (Andre Przywara) · 2015-03-05
[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup · Dave.Martin@arm.com (Dave Martin) · 2015-03-05

STALE4159d REVIEWED: 2 (2M)

1 review trailer.

[PATCH REPOST 0/2] Remove pl011 startup glitches and avoid dummy TX during startup

From: andre.przywara@arm.com (Andre Przywara)
Date: 2015-03-04 16:44:00
Also in: linux-serial

Hi Dave,

On 04/03/15 12:27, Dave P Martin wrote:

There have been no comments on this series since my previous post, and
I have made no further changes.

Since then, I have confirmed that this also works robustly with TX DMA
enabled on Juno.

Review/comments/testing still welcome.

this has been tested briefly on a Calxeda Midway without any
regressions. Also I use them as the base for my SBSA series now (which
are tested on the model and the Midway) and I see that all problems
observed before are gone now.

Tested-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre.