[PATCH 00/12] USB: chipidea: patchset for performance improvement

On Thu, Mar 19, 2015 at 11:36:29AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:

On 09:19 Thu 19 Mar     , Peter Chen wrote:

quoted

Hi all,

In this patch set, I add some interfaces for tuning the performance
of chipidea usb driver. With this set, the USB performance can be improved
at some user cases with suitable parameters. The main changes:

- Interface to tune interrupt threshold control, and set
'Immediate' for default value
- The glue layer can disable stream mode according to USB role
- Interface to tune AHB burst configuration at SBUSCFG
- Interface to tune tx/rx burst size
- i.mx changes for achieving better performance, it can reduce
  the latecy between bus and USB FIFO, and reduce the overrun
  and underrun occurrences, it is useful for the system bus is busy.
  we see great improvement for ISO transfer, eg, high resolution
  USB camera when the bus is busy.

Below are some test results at imx6sx sdb board
(set ehci_hcd.park=3 at bootargs), the tests are done
at v4.0 kernel, no other bus loading during the tests,
so we have not seen performance change for some use cases.

USB Mass Storage (Host mode)
With Patch Set		Without Patch Set
R: 26.9 MB/s		27 MB/s
W: 25.2 MB/s		24.5 MB/s

1G USB Ethernet Card
With Patch Set		Without Patch Set
TX: 186 Mb/s		185 Mb/s
RX: 219 Mb/s		216 Mb/s

g_ncm (Device Mode)
With Patch Set		Without Patch Set
TX: 166MB/s		163MB/s
RX: 230MB/s		184MB/s

The improve is not drag sticks except for gcm RX

The most interesting path will be on full system loaded

Yeah, I can have a try. But we have no GPU driver and related
apps on it, I am not sure if I can create starve bus situation.
Any high bus loading tools suggest?

-- 

Best Regards,
Peter Chen