[linux-sunxi] [PATCH v3 3/3] ARM: dts: sun6i: Add dts file for CSQ CS908 board

The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND,
rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG
controller), ethernet, 3.5 mm jack with a/v out and hdmi out.

Note it has no sdcard slot and therefore can only be fel booted.

Signed-off-by: Hans de Goede <redacted>
---
Changes in v2:
-Drop URL from commit message, it is likely to go stale
Changes in v3:
-Do not duplicate the DT path, use label references instead
---
 arch/arm/boot/dts/Makefile             |   3 +-
 arch/arm/boot/dts/sun6i-a31s-cs908.dts | 102 +++++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun6i-a31s-cs908.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 803e914..a86f232 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile

@@ -462,7 +462,8 @@ dtb-$(CONFIG_MACH_SUN6I) += \
        sun6i-a31-app4-evb1.dtb \
        sun6i-a31-colombus.dtb \
        sun6i-a31-hummingbird.dtb \
-       sun6i-a31-m9.dtb
+       sun6i-a31-m9.dtb \
+       sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-bananapi.dtb \
        sun7i-a20-cubieboard2.dtb \

diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
new file mode 100644
index 0000000..491aa83
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts

@@ -0,0 +1,102 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31s.dtsi"
+
+/ {
+       model = "CSQ CS908 top set box";
+       compatible = "csq,cs908", "allwinner,sun6i-a31s";
+};
+
+&usbphy {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&pio {
+       usb1_vbus_pin_csq908: usb1_vbus_pin at 0 {
+               allwinner,pins = "PC27";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <0>;
+               allwinner,pull = <0>;
+       };