[PATCH 09/15] ARM: dts: sun4i: Add USB Dual Role Controller
From: Hans de Goede <hidden>
Date: 2015-03-09 20:40:22
Also in:
linux-devicetree
Subsystem:
musb multipoint high speed dual-role controller, the rest, usb subsystem · Maintainers:
Bin Liu, Linus Torvalds, Greg Kroah-Hartman
Possibly related (same subject, not in this thread)
- 2015-03-10 · Re: [PATCH 09/15] ARM: dts: sun4i: Add USB Dual Role Controller · Hans de Goede <hidden>
- 2015-03-09 · Re: [PATCH 09/15] ARM: dts: sun4i: Add USB Dual Role Controller · Julian Calaby <hidden>
Add a node for the otg/drc usb controller to sun4i-a10.dtsi. Signed-off-by: Hans de Goede <redacted> --- arch/arm/boot/dts/sun4i-a10.dtsi | 12 ++++++++++++ drivers/usb/musb/Kconfig | 1 + 2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 2f792b6..e550415 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi@@ -574,6 +574,18 @@ status = "disabled"; }; + usb_otg: usb at 01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + syscons = <&syscon>; + status = "disabled"; + }; + usbphy: phy at 01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy";
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 8180a3a..fab8e9a 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig@@ -65,6 +65,7 @@ comment "Platform Glue Layer" config USB_MUSB_SUNXI tristate "Allwinner (sunxi)" depends on ARCH_SUNXI + depends on NOP_USB_XCEIV select GENERIC_PHY config USB_MUSB_DAVINCI
--
2.3.1