[PATCH v5 1/3] dt: bindings: add wl18xx wireless device
From: Eliad Peller <hidden>
Date: 2015-03-09 15:36:40
Also in:
linux-devicetree, linux-omap, linux-wireless
Subsystem:
networking drivers (wireless), open firmware and flattened device tree bindings, the rest · Maintainers:
Johannes Berg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add device tree binding documentation for TI's wl18xx wlan chip. Signed-off-by: Eliad Peller <redacted> --- .../devicetree/bindings/net/wireless/ti,wl18xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wl18xx.txt
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl18xx.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl18xx.txt
new file mode 100644
index 0000000..9dcf535
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl18xx.txt@@ -0,0 +1,39 @@ +TI Wilink8 (wl18xx) SDIO devices + +This node provides properties for controlling the wilink8 wireless device. The +node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + - compatible : Should be "ti,wl18xx". + - compatible: should be one of the following: + * "ti,wl1801" + * "ti,wl1805" + * "ti,wl1807" + * "ti,wl1831" + * "ti,wl1835" + * "ti,wl1837" + - interrupts : specifies attributes for the out-of-band interrupt. + +Optional properties: + - interrupt-parent : the phandle for the interrupt controller to which the + device interrupts are connected. + +Example: + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore at 2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_NONE>; + }; +};
--
1.8.5.2.229.g4448466.dirty