[linux-sunxi] [PATCH 7/7] ARM: dts: sun7i: Enable cap-sdio-irq for bananapro sdio wifi

Hi,

On 08-03-15 03:42, Chen-Yu Tsai wrote:

On Sun, Mar 8, 2015 at 3:01 AM, Hans de Goede [off-list ref] wrote:

quoted

The sdio wifi on the Banana Pro does not appear to have an oob irq hooked
up, so enable sdio-irq support to avoid unnecessary polling.

I wonder if this is stable enough to put back into the mmc driver, i.e.
declare the capability in the driver itself? IIRC at one point it did.

That is a good question, I believe strongly that the sdio wifi issues we've
been seeing which were the reason to disable cap-sdio-irq in the driver are
actually unrelated to the irq delivery mechanism. So IMHO yes we can just enable
this for all devices in the driver, and yes that would be a better solution.

Maxime, if I send a patch to enable cal-sdio-irq at the driver level ( as it
really is a hardware feature not a board feature), will you ack it ?

If the answer is yet, then please do NOT apply this patch and I'll send
a sunxi-mmc.c patch instead.

Regards,

Hans

ChenYu

quoted

Signed-off-by: Hans de Goede <redacted>
---
  arch/arm/boot/dts/sun7i-a20-bananapro.dts | 1 +
  1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index fb89fe7..d0cd78f 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts

@@ -164,6 +164,7 @@
         vmmc-supply = <&reg_vmmc3>;
         bus-width = <4>;
         non-removable;
+       cap-sdio-irq;
         status = "okay";
  };

--

2.3.1