[PATCH] coresight: adding basic support for Spreadtrum SC9836
From: mathieu.poirier@linaro.org (Mathieu Poirier)
Date: 2015-03-24 15:08:56
Also in:
linux-devicetree, lkml
On 23 March 2015 at 23:48, Chunyan Zhang [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Support only for ETB, FUNNEL, STM are included currently. Support for ETM, TPIU and the replicator linked to it are not included in this version patch. Signed-off-by: Chunyan Zhang <redacted> --- arch/arm64/boot/dts/sprd/sc9836.dtsi | 57 ++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index f92f1b4..2ca80f3 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi@@ -45,6 +45,63 @@ }; }; + etb at 10003000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + arm,primecell-periphid = <0x0003b907>;
Specifying the primecell id in the device tree like this is usually to avoid probing of the memory space by the AMBA mechanic when bus components are discovered. As such components are probed and initialised when their drivers are registered with the diver core later in the boot process. Is there a good reason why this is done here? Especially when the funnel and STM don't specify their cell IDs in the DT.
+ coresight-default-sink;
Please remove the above - this feature no longer exists.
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port0>;
+ };
+ };
+ };
+
+ funnel at 10001000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x10001000 0 0x1000>;
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output port */
+ port at 0 {
+ reg = <0>;
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+
+ /* funnel input port 0~3 is reserved for ETMs */
+ port at 1 {
+ reg = <4>;
+ funnel_in_port4: endpoint {
+ slave-mode;
+ remote-endpoint = <&stm_out>;
+ };
+ };
+ };
+ };
+
+ stm at 10006000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0 0x10006000 0 0x1000>,
+ <0 0x01000000 0 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+ clocks = <&clk26mhz>;
+ clock-names = "apb_pclk";
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
+ };
+ };
+
gic: interrupt-controller at 12001000 {
compatible = "arm,gic-400";
reg = <0 0x12001000 0 0x1000>,
--
1.9.1