Thread (2 messages) 2 messages, 2 authors, 2015-03-20
STALE4134d

[PATCH] mfd: devicetree: qcom_rpm: document IPQ8064 resources

From: Andy Gross <hidden>
Date: 2015-03-20 03:02:38
Also in: linux-arm-msm, lkml
Subsystem: arm/qualcomm mailing list, multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Josh Cartwright <redacted>

The IPQ8064 SoC has several RPM-controlled resources, an NSS fabric
clock and four regulator resources.  Provide definitions for them.

Signed-off-by: Josh Cartwright <redacted>
---
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt |    1 +
 include/dt-bindings/mfd/qcom-rpm.h                 |    6 ++++++
 2 files changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 85e3198..94d9ae8 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -12,6 +12,7 @@ frequencies.
 		    "qcom,rpm-apq8064"
 		    "qcom,rpm-msm8660"
 		    "qcom,rpm-msm8960"
+		    "qcom,rpm-ipq8064"
 
 - reg:
 	Usage: required
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 388a6f3..13a9d4b 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -141,6 +141,12 @@
 #define QCOM_RPM_SYS_FABRIC_MODE		131
 #define QCOM_RPM_USB_OTG_SWITCH			132
 #define QCOM_RPM_VDDMIN_GPIO			133
+#define QCOM_RPM_NSS_FABRIC_0_CLK		134
+#define QCOM_RPM_NSS_FABRIC_1_CLK		135
+#define QCOM_RPM_SMB208_S1a			136
+#define QCOM_RPM_SMB208_S1b			137
+#define QCOM_RPM_SMB208_S2a			138
+#define QCOM_RPM_SMB208_S2b			139
 
 /*
  * Constants used to select force mode for regulators.
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help