Hi,

On Fri, Mar 6, 2015 at 2:04 AM, Mark Rutland [off-list ref] wrote:

Hi,

[...]

quoted

quoted

quoted

+       psci {
+               compatible = "arm,psci";
+               method = "smc";
+               cpu_off = <0x84000002>;
+               cpu_on = <0xC4000003>;
+       };

Back at v2 you mentioned that CPU_OFF wasn't working [1].

Do both CPU_ON and CPU_OFF work for all CPUs, including the boot CPU?

The CPU1 ~ CPU7 are well woking about CPU_ON/OFF.
CPU0 (boot CPU) is only well working for CPU_OFF.
But when I try to turn on the CPU0 after CPU_OFF, I failed it.

That's rather worrying. Can you look into what's going on here? I'd
rather not have dts describing things which are known to be broken.

The board dts don't include any node for CPU_ON/OFF.
When I try to turn on the CPU0 (boot CPU), fail to turn on and lockup happen.
After lockup happen, I cannot use the console.

quoted

quoted

I take it CPUs boot at EL2?

Do the CPUs boot at EL1 or EL2?

Unfortunately, I cannot check the secure firmware for Exynos5433 SoC.
I think that a few SoC provider probably would know it.

[snip]

Thanks,
Chanwoo Choi