[PATCH 0/3] Add initial DT support for Qualcomm SPMI PMIC devices

On 02/26, Ivan T. Ivanov wrote:

Hi Stephan, 

Sorry for delayed answer.

On Thu, 2015-02-19 at 16:49 -0800, Stephen Boyd wrote:

quoted

On 02/03/15 04:17, Ivan T. Ivanov wrote:

quoted

Following set of patches add initial DT support for PMIC devices
found on recent Quqalcomm chipsets. Details for SPMI bus and PMIC arbiter
could be found here [1].

Can you please put the specific compatible strings for the pmic model
into the nodes in addition to the generic "qcom,spmi-pmic"? We may want
to have regmap config tables in the future that describe the
cache/read/write abilities of the regsiters. If all we have is the
generic binding then we don't have a way to populate these tables.
Unless the plan there is to use the revid registers?

I would really like that we can use "revid" registers, but I don't know... 

From what I can see usually in one physical PMIC chip they
are 2 USID devices.

I can successfully discover following USID's on APQ8074 boards:

pmic-spmi 0-00: qcom,pm8941-v1.0 detected
pmic-spmi 0-01: qcom,pm8941-v1.0 detected
pmic-spmi 0-04: qcom,pm8841-v0.0 detected
pmic-spmi 0-05: qcom,pm8841-v0.0 detected

Unfortunately on PM8916 only one device is detected, with USID 0.
But they should be two, judging by downstream DTS files, right?

pmic-spmi 0-00: qcom,pm8916-v0.0 detected 
pmic-spmi 0-01: unknown device

For communication with PM8916 I am using recent patches from Gilad [1].
Maybe there are still some issues with these patches, which can cause
this behavior or PM8916 just didn't have these registers for USID 1?

Regards,
Ivan 

Hmm... do you have 4 total rev-id nodes on apq8074? I only see
one rev-id node per pmic (2 total), so I'm a little lost how the
correct pmic version is detected on the 0-01 and 0-05 devices in
your example above. Maybe I've missed something though, I'll have
to check in a few hours when I'm in the office.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project