On 20/02/15 14:59, Tero Kristo wrote:

On 02/20/2015 01:46 PM, Tomi Valkeinen wrote:

quoted

On 13/02/15 17:42, Tero Kristo wrote:

quoted

On 02/13/2015 05:25 PM, Nishanth Menon wrote:

quoted

quoted

I would probably wait for control module to become syscon and probably
model this as syscon clk - I thin we should be seeing a series
sometime soon.

Yeah, I will be posting a series in a bit, just running some final tests
on it.

I did the above with Tero's series. Adding the DES HDCP clock works ok.

However, I'm not able to do this in HWMOD framework. To enable the DSS
IP block I need to enable both the DSS func clock and the DES HDCP
clock, but the HWMOD framework only allows one mainclock.

I added the HDCP clock as an opt clock, but those are not enabled
intially by the HWMOD framework, and the call in omap_hwmod.c:_enable()
to soc_ops.wait_target_ready(oh) calls fails.

So... Any ideas how to proceed?

Add the clock enable at the end of dra7xx_dt_clk_init()?

You need to disable the clock at some point though.

Where would I disable it? And if the clock is disabled, doesn't this
again fail when the dss driver tries to enable the IP block? The driver
can enable the HDCP opt clock only later, when the IP block should be up
already.

 Tomi


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150220/4cb3a54c/attachment.sig>