[resend PATCH v3 4/4] usb: phy: add phy-hi6220-usb

On 02/10/2015 10:48 PM, Felipe Balbi wrote:

On Tue, Feb 10, 2015 at 05:10:04PM +0800, Zhangfei Gao wrote:

quoted

Add usb phy controller for hi6220 platform

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
  drivers/usb/phy/Kconfig          |   9 ++
  drivers/usb/phy/Makefile         |   1 +
  drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++
  3 files changed, 316 insertions(+)
  create mode 100644 drivers/usb/phy/phy-hi6220-usb.c

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e..405a3d0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig

@@ -173,6 +173,15 @@ config USB_MXS_PHY

  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.

+config USB_HI6220_PHY
+	tristate "hi6220 USB PHY support"
+	select USB_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
  config USB_RCAR_PHY
  	tristate "Renesas R-Car USB PHY support"
  	depends on USB || USB_GADGET

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..00172d3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
  obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
  obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o

new drivers only on drivers/phy/, sorry.

OK, thanks for the info, I don't know this at all.
So even usb phy should be put under drivers/phy/.

Will change that.

Thanks Felipe