[PATCH v5 2/7] mailbox: arm_mhu: add driver for ARM MHU controller

On Tue, Feb 03, 2015 at 05:29:23PM +0800, Vincent Yang wrote:

+static int mhu_send_data(struct mbox_chan *chan, void *data)
+{
+	struct mhu_link *mlink = chan->con_priv;
+
+	pr_debug("%s:%d\n", __func__, __LINE__);
+	if (!mhu_last_tx_done(chan)) {
+		dev_err(chan->mbox->dev, "Last TX(%d) pending!\n", mlink->irq);
+		return -EBUSY;
+	}
+
+	writel_relaxed((u32)data, mlink->tx_reg + INTR_SET_OFS);

Doesn't that cause a GCC warning?

+static int mhu_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	int i, err;
+	struct arm_mhu *mhu;
+	struct device *dev = &adev->dev;
+	int mhu_reg[3] = {0x0, 0x20, 0x200};
+
+	err = amba_request_regions(adev, NULL);
+	if (err)
+		return err;
+
+	/* Allocate memory for device */
+	mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
+	if (!mhu)
+		return -ENOMEM;
+
+	mhu->base = devm_ioremap(dev, adev->res.start,
+				 resource_size(&adev->res));
+	if (!mhu->base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENXIO;

	mhu->base = devm_ioremap_resource(dev, &adev->res);
	if (IS_ERR(mhu->base)) {
		dev_err(dev, "ioremap failed\n");
		return PTR_ERR(mhu->base);

+	}
+
+	for (i = 0; i < 3; i++) {
+		mhu->chan[i].con_priv = &mhu->mlink[i];
+		mhu->mlink[i].irq = adev->irq[i];
+		mhu->mlink[i].rx_reg = mhu->base + mhu_reg[i];
+		mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + 0x100;
+	}
+
+	mhu->mbox.dev = dev;
+	mhu->mbox.chans = &mhu->chan[0];
+	mhu->mbox.num_chans = 3;
+	mhu->mbox.ops = &mhu_ops;
+	mhu->mbox.txdone_irq = false;
+	mhu->mbox.txdone_poll = true;
+	mhu->mbox.txpoll_period = 10;
+
+	amba_set_drvdata(adev, mhu);
+
+	err = mbox_controller_register(&mhu->mbox);
+	if (err) {
+		dev_err(dev, "Failed to register mailboxes %d\n", err);
+		return err;
+	}
+
+	dev_err(dev, "ARM MHU Mailbox registered\n");

Why is this an error?

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.