[PATCH 3/4] clk: Provide always-on clock support

On 28 February 2015 at 02:44, Lee Jones [off-list ref] wrote:

Lots of platforms contain clocks which if turned off would prove fatal.
The only way to recover from these catastrophic failures is to restart
the board(s).  Now, when a clock is registered with the framework it is
compared against a list of provided always-on clock names which must be
kept ungated.  If it matches, we enable the existing CLK_IGNORE_UNUSED
flag, which will prevent the common clk framework from attempting to
gate it during the clk_disable_unused() procedure.

If a clock is critical on a certain board, it could be got+enabled
during early boot so there is always a user.
To be able to do that from DT, maybe add a new, say, CLK_ALWAYS_ON
flag could be made to initialize the clock with one phantom user
already. Or just reuse the CLK_IGNORE_UNUSED?

-Jassi