On Friday 27 February 2015 07:38:09 Tony Lindgren wrote:

* Aaro Koskinen [off-list ref] [150226 15:06]:

quoted

Hi,

On Thu, Feb 26, 2015 at 11:19:50PM +0100, Pavel Machek wrote:

quoted

Ok, it seems that new config dependencies broke my kconfig. These will
not be enabled if you just to make oldconfig; you want to make sure
they are on.

 OMAP2430 and onwards (USB_MUSB_OMAP2PLUS) [N/m/y] (NEW)
TWL4030 USB Transceiver Driver (TWL4030_USB) [N/m/y/?] (NEW)

Yes, also other users have reported "USB breakage" with 4.0-rc1 on N900
etc caused by this.

Commit fbba7db3990cb707ff91cd6507d53a0a730afe97 (usb: musb:
add omap-control dependency) changed USB_MUSB_OMAP2PLUS to depend
on OMAP_CONTROL_PHY but that seems to be wrong at least for OMAP3.
omap_control_phy.h provides dummy functions when it's not enabled.
So there should be no dependency.

The problem I fixed was a link error when USB_MUSB_OMAP2PLUS
is built-in but OMAP_CONTROL_PHY is a loadable module.

I guess the solution would be to make drivers/phy handle whatever
omap_control_usb_set_mode is doing in a generic way.

I'm very sorry about the breakage in a patch that is marked for
backports.

Please accept my apology and the workaround patch in the
follow-up mail.

	Arnd