On Wed, Feb 11, 2015 at 6:12 AM, Russell King - ARM Linux
[off-list ref] wrote:

On Wed, Feb 11, 2015 at 09:28:37AM +0100, Marek Szyprowski wrote:

quoted

Hello,

On 2015-01-27 09:25, Sumit Semwal wrote:

quoted

Add some helpers to share the constraints of devices while attaching
to the dmabuf buffer.

At each attach, the constraints are calculated based on the following:
- max_segment_size, max_segment_count, segment_boundary_mask from
   device_dma_parameters.

In case the attaching device's constraints don't match up, attach() fails.

At detach, the constraints are recalculated based on the remaining
attached devices.

Two helpers are added:
- dma_buf_get_constraints - which gives the current constraints as calculated
      during each attach on the buffer till the time,
- dma_buf_recalc_constraints - which recalculates the constraints for all
      currently attached devices for the 'paranoid' ones amongst us.

The idea of this patch is largely taken from Rob Clark's RFC at
https://lkml.org/lkml/2012/7/19/285, and the comments received on it.

Cc: Rob Clark <redacted>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

The code looks okay, although it will probably will work well only with
typical cases like 'contiguous memory needed' or 'no constraints at all'
(iommu).

Which is a damn good reason to NAK it - by that admission, it's a half-baked
idea.

If all we want to know is whether the importer can accept only contiguous
memory or not, make a flag to do that, and allow the exporter to test this
flag.  Don't over-engineer this to make it _seem_ like it can do something
that it actually totally fails with.

jfyi, I agree with that.. I think the flag is probably the right
approach to start with.  At the end of the day it *is* still just an
in-kernel API (and not something that ends up as userspace ABI) so
when we come up with the use case to make it more generic we can.  Vs.
making it look like something more generic when it isn't really yet.

As I've already pointed out, there's a major problem if you have already
had a less restrictive attachment which has an active mapping, and a new
more restrictive attachment comes along later.

It seems from Rob's descriptions that we also need another flag in the
importer to indicate whether it wants to have a valid struct page in the
scatter list, or whether it (correctly) uses the DMA accessors on the
scatter list - so that exporters can reject importers which are buggy.

to be completely generic, we would really need a way that the device
could take over only just the last iommu (in case there were multiple
levels of address translation)..

I'm not completely sure, but I *think* the other arm gpu's have their
own internal mmu for doing context switching, etc, so if there is an
additional iommu in front of them they may actually still want to use
the normal dma api's.  Someone please contradict me if I am wrong.  If
this ends up being an issue only for msm, then I'm completely ok with
the easier option of a less generic solution..

BR,
-R

--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.