[PATCH v8 1/3] i2c: iProc: define Broadcom iProc I2C binding
flat view
STALE4266d
SUPERSEDED: 3 (3M)
From: rjui@broadcom.com (Ray Jui)
Date: 2015-02-07 01:27:18
Also in:
linux-devicetree, linux-i2c, lkml
Subsystem:
i2c subsystem host drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andi Shyti, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v8 of 9 in this series; 2 review trailers.
Revisions (9)
Document the I2C device tree binding for Broadcom iProc family of SoCs Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Kevin Cernekee <cernekee@chromium.org> --- .../devicetree/bindings/i2c/brcm,iproc-i2c.txt | 37 ++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
new file mode 100644
index 0000000..81f982c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt@@ -0,0 +1,37 @@ +Broadcom iProc I2C controller + +Required properties: + +- compatible: + Must be "brcm,iproc-i2c" + +- reg: + Define the base and range of the I/O address space that contain the iProc + I2C controller registers + +- interrupts: + Should contain the I2C interrupt + +- clock-frequency: + This is the I2C bus clock. Need to be either 100000 or 400000 + +- #address-cells: + Always 1 (for I2C addresses) + +- #size-cells: + Always 0 + +Example: + i2c0: i2c at 18008000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + + codec: wm8750 at 1a { + compatible = "wlf,wm8750"; + reg = <0x1a>; + }; + };
--
1.7.9.5