[PATCH 6/9] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: 2015-01-20 13:01:49
Also in:
linux-sh
Hi Geert, Thank you for the patch. On Tuesday 20 January 2015 13:51:43 Geert Uytterhoeven wrote:
Move the Ethernet node from the ad-hoc lbsc node to the BSC node, as its connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Ulrich Hecht <redacted>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
quoted hunk ↗ jump to hunk
--- v3: - Add Tested-by, v2: - New. --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-)diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dtsb/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 0d50bef0123449f5..44c4cac1820a4dfe 100644--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts@@ -72,26 +72,6 @@ regulator-always-on; }; - lbsc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - - ethernet at 8000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x08000000 0x1000>; - interrupt-parent = <&irqc1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_1v8>; - }; - }; - leds { compatible = "gpio-leds"; led1 {@@ -184,6 +164,21 @@ voltage-tolerance = <1>; /* 1% */ }; +&bsc { + ethernet at 8000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; +}; + &cmt1 { status = "okay"; };
-- Regards, Laurent Pinchart