Hello.

On 1/31/2015 7:21 AM, Simon Horman wrote:

quoted

Add the initial device tree for the R8A7794 SoC based SILK low cost board.
SCIF2 serial port support is included, so that the serial console can work.

quoted

Signed-off-by: Sergei Shtylyov <redacted>

quoted

---
This patch is against the 'renesas-devel-20150129-v3.19-rc6' tag of Simon
Horman's 'renesas.git' repo.

quoted

  arch/arm/boot/dts/Makefile         |    1
  arch/arm/boot/dts/r8a7794-silk.dts |   41 +++++++++++++++++++++++++++++++++++++
  2 files changed, 42 insertions(+)

[...]

quoted

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================

--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts

@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+	model = "SILK";
+	compatible = "renesas,silk", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "console=ttySC0,38400 ignore_loglevel";

Please remove console= for consistency with other boards
based on Renesas SoCs.

    I can't, there will be no console at all.

WBR, Sergei