[PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
From: Ulf Hansson <hidden>
Date: 2015-01-29 10:01:44
Also in:
linux-devicetree, linux-mmc
On 29 January 2015 at 10:42, Gregory CLEMENT [off-list ref] wrote:
Hi Ulf, On 29/01/2015 10:31, Ulf Hansson wrote:quoted
[...]quoted
quoted
Seems like this function can be void instead of always returning 0.In patch 4 "mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes", this function can return other values than 0. I could change the prototype in patch 4, but it would also imply removing the test of the return value in this patch and adding in back patch 4. By returning a value in this patch, it reduced the amount of change over the patches. But if you still prefer than I this function return void in this patch, I can do it.No worries, let's keep it as an int. But then I have a few other comments, see below.OKquoted
quoted
Thanks, Gregoryquoted
quoted
+{ + host->quirks |= SDHCI_QUIRK_MISSING_CAPS; + /* + * According to erratum 'FE-2946959' both SDR50 and DDR50 + * modes require specific clock adjustments in SDIO3 + * Configuration register, if the adjustment is not done, + * remove them from the capabilities. + */ + host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); + return 0; +} + static void pxav3_reset(struct sdhci_host *host, u8 mask) { struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));@@ -319,6 +333,9 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) clk_prepare_enable(pxa->clk_core); if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { + ret = armada_38x_quirks(host); + if (ret < 0)Since in patch 4 you return a proper error code, let's also adopt to that here by changing to: "if (IS_ERR(ret))The function returns an int and IS_ERR expects a pointer. I am not sure this macro would be appropriate here.
You are right. Don't know what I was thinking. :-) Kind regards Uffe