Hi,

On Mon, Jan 26, 2015 at 10:56:40AM -0600, Felipe Balbi wrote:

quoted

the references below are from SPRUHL7

On Fri, 23 Jan 2015, Felipe Balbi wrote:

quoted

Without hwmod data for DebugSS, performance monitors
have no chance of running on AM43xx devices.

Signed-off-by: Felipe Balbi <redacted>
---
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 40 ++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/prcm43xx.h             |  1 +
 2 files changed, 41 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c6c8410160e..6709704dd5b5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c

@@ -19,6 +19,7 @@
 #include "omap_hwmod.h"
 #include "omap_hwmod_33xx_43xx_common_data.h"
 #include "prcm43xx.h"
+#include "prm44xx.h"
 #include "omap_hwmod_common_data.h"
 
 

@@ -60,6 +61,44 @@ static struct omap_hwmod am43xx_wkup_m3_hwmod = {
 	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
 };
 
+/*
+ * 'debugss' class
+ * debug and emulation sub system
+ */
+static struct omap_hwmod_opt_clk am43xx_debugss_opt_clks[] = {
+	{ .role = "dbg_sysclk", .clk = "dbg_sysclk_ck" },
+	{ .role = "dbg_clka", .clk = "dbg_clka_ck", },
+	{ .role = "dbg_clkb", .clk = "dbg_clkb_ck", },
+	{ .role = "dbg_clkc", .clk = "dbg_clkc_ck", },
+};
+
+static struct omap_hwmod_class am43xx_debugss_hwmod_class = {
+	.name	= "debugss",
+};
+
+/* debugss */
+static struct omap_hwmod am43xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &am43xx_debugss_hwmod_class,
+	.clkdm_name	= "l3_aon_clkdm",
+	.main_clk	= "trace_clk_div_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_WKUP_DBGSS_CLKCTRL_OFFSET,

According to Table 6-275 "PRCM_CM_WKUP_DBGSS_CLKCTRL Register Field 
Descriptions" this should have a 

			.modulemode   = MODULEMODE_SWCTRL,

hm... modulemode SWCTRL causes wait_target_ready to fail. Any hints ?

gets stuck in transition state. PRCM_CM_WKUP_DBGSS_CLKCTRL is always
read as 0x 12510f00 which would translate into:

- module disabled
- all opt clocks are on
- module is transitioning
- module in standby
- clkA as TPIU and STM trace clock
- all dividers set to 2

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150126/6857ea67/attachment.sig>